Water Analysis Solutionswww.hbbossen.com

DO-9551 Dissolved Oxygen controller is an industrial on-line dissolved oxygen measurement and control instruments. Microprocessor controlled intelligent operation, feature-rich software with easy to install, strong anti-interference, less maintenance and so on.
 Instrument features:
1. The low limit within the entire range of settings and hysteresis setting relay
2. The isolation can migrate reversible 4 ~ 20mA current signal output.
Technical Parameters:
Measuring range: 0.0 ~ 200.0 ug / L □
0.00 ~ 20.00 mg / L □
ATC TEMP: 0 ~ 60.0 ℃
Accuracy: 0.1 ug / L □
0.01 mg / L □
ATC TEMP: 0.1 ℃
Display: multi-parameter Segment LCD
Calibration mode: zero point calibration; calibration slope
Temperature compensation: Automatic compensation (ATC), NTC 10K
Temperature compensation range: 0.0 ℃ ~ 60.0 ℃
Current Output: Isolated 4 ~ 20mA reversibly migrate
Control output: high and low limit (normally open, normally closed) output double contact
Contact capacity: 10A / 250V AC (resistive load)
Sensor Cable Length: 10m or agreement ______m
Sensor Thread Size: 3/4 "pipe thread
Power supply: AC 220V ± 10% 50 / 60Hz
Environmental conditions: (1) Temperature 0 ~ 50 ℃ (2) humidity ≤85% RH
Dimensions: 96 × 96 × 120mm (width × height × depth)
Hole Size: 92 × 92mm
Installation: panel mounting