Water Analysis Solutionswww.hbbossen.com

This meter is a perfect combination with the most advanced electronic technology, sensor technology and software design. The meter can measure the parameters of conductivity, TDS, salinity, resistivity, DO and temperature for high accuracy water solution. It is the best portable water analysis meter with the highest performance and the lowest cost. It is suitable for the trade such as the mining industry, power plant, water treatment projects and environmental protection, etc., especially has more extensive application in the field and spot test.
Built-in microprocessor chip, beautiful appearance, multi-functional and easy to use, this meter has the following prominent features:
1.1. Double parameters meter, equipped with conductivity electrode, DO electrode, calibration solution and special carrying case, easy to use.
1.2. Built-in microprocessor chip. Its features up to functions of automatic calibration, automatic temperature compensation, data storage, function stting, auto power off and low voltage indication etc.
1.3. Adopts digital filter and step slipping technology to intelligently improve meter’s response speed and result accuracy. “    ” will appear when reading to be stable.

1.4. Adopts advanced automatic frequency convertible and voltage regulation technology to enlarge the measuring range 10 times for conductivity electrode which constant K=1. It can meet measuring accuracy requirement for range within 0 to 200mS/cm by using only one-point calibration. It is the particular one–point calibration function for this meter.
1.5. It automatically recognizes 8 kinds of conductivity standard solution. User can choose anyone from two series of standard solutions: Europe & USA series and China series.
1.6. Automatically select conductivity measuring range, the meter will do non-linearity temperature compensation test for purified and high purified water less than 10 uS/cm, which greatly improve the measuring accuracy. It is especially suitable for use in fields of electric power, microelectronics and medicine.
1.7. Equips new type of DO electrode with temperature and salinity sensor which has function of automatic temperature compensation and automatic salinity compensation as well as manual barometric pressure compensation inside meter, easy to use, accurate to measure.
1.8. Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
1.9. Meter’s circuit board adopts SMT film-covering technology to improve meter’s production reliability.
1.10. Meter has the blue backlight LCD display.
1.11. Dustproof and waterproof meter meets IP57 rating.
2. Technical Parameters:
 

2.1. Conductivity:

Measuring range	Conductivity: (0.00 to 19.99) μS/cm  (20.0 to 199.9) μS/cm (200 to 1999) μS/cm   (2.00 to 19.99) mS/cm (20.0 to 199.9) mS/cm TDS:    (0 to 100) g/L Salinity:  (0 to 100) ppt Resistivity:(0 to 100) MΩ ● cm
Resolution	0.01/0.1/1μS/cm  0.01/0.1 mS/cm
Accuracy	Meter: ±1.0% FS, Overall: ±1.5% FS
Temp. compensation range	(0 ~ 50) ℃(automatic)
Electrode constant	0.1 / 1 / 10 cm-1
Benchmark temperature	25℃, 20℃and 18℃

2.2. Dissolved Oxygen:

Measuring range	(0 to 40.00) mg/L (ppm)  (0 to 200.0) %
Resolution	0.1/0.01 mg/L (ppm) 1/0.1 %
Accuracy	Meter: ±0.10 mg/L, Overall: ±0.40 mg/L
Response time	≤30 s (25℃, 90% response)
Residual current	≤0.1 mg/L
Temp. compensation range	(0 to 45) ℃ (automatic)
Salinity compensation range	(0 to 45) ppt (automatic)
Barometric pressure range	(66 to 200) kPa (manual)
Automatic calibration	Air saturated by water; water saturated by air
Electrode type	Polarogram type

2.3. Other Technical Parameters:

Data storage	200 groups
Storage content	Series number, measuring value measuring unit and temperature value.
Power	Two AA batteries (1.5V x2)
Size and weight	Meter: (65×120×31) mm/180g; carrying case: (360×270×76) mm/1.6Kg
Quality and safety certification	ISO9001:2000, CE and CMC

2.4. Working Condition:

Environment temperature	5 to 35 ℃ (0.01 grade)
Environmental humidity	≤85%
IP rating	IP57 Dustproof and waterproof