Water Analysis Solutionswww.hbbossen.com

FCT-8350 Flow Control Transmitter (F-Flow,C-Controller,T-Transmitter) is an impeller flow measuring instrument ，240x160resolution graphic dot matrix LCD display, big screen、white/green/dual background optional backlight provides instantaneous flow, cumulative flow/transmitter/control，the major parameter are display in the same screen, very easy to use and view. This type flowmeter generally used in water treatment industry and solutions without or weak acid/alkali solutions.
Pulse type five-blade flow sensor structure is simple, cost effective.
 
Technical Features
☆  Chinese/English dual-language menu, guided menu settings and operation；
☆  K coefficient and standard diameter/non-standard of a variety of settings way，flexible and convenient；
☆  A variety of size or material pipeline connection, Tee and saddle mounting fitting for selection；
☆  Different kinds of the engineer working load could be chosen，it can meet the measurement standards of different country and region；
☆  To start the polyline modification for the measurements to provide better precision correction;
☆  Compatible tangential/axial-type turbine flow transmitter with pulse output；
☆  Small signal cutting and small signal correction function，to meet the operation compensation under low flow rate condition；
☆  Semiconductor photoelectric relay（non contact）, switch control/proportional pulse control;
☆  It can achieve the ratio of flow parameter pulse pharmacy dosing and preset flow concentration of RO water control；
☆  Programmable instantaneous flow lower limit alarm，the frequency pulse of instantaneous flow rate，direct sensor pulse integrating volume frequency division，integrating volume pulse and many kinds of control mode for selection, it can meet different process control requirements；
☆  Measurement/control/transmission each unit can complete electrical isolated，each other without any interference;
☆  Isolated, transferable 4~20mA current output, two points transmitting range random setting within full scope；
☆  present water temperature (℃) / transmitting current (4~20mA) can be check onsite；
☆  Industrial standard wire contact, EMC electromagnetic compatible design, platform design development, serial product classification；
☆  Meeting international electronic power supply regulation, AC ,DC current input which with non polarity wire connection;
☆  Our products with strict quality management , SMT  (Surface Mounted Technology), AOI (automatic optical inspection (system), ICT …；

Applications

  Widely used for online measurement of acid& alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.

Working Principle

 

Fluid in the pipeline flow turbine cause spinning impact，Magnet on the turbine blades with the rotation sensor generates a measurement signal，the signal is proportional to the flow velocity，by a correlation coefficient K of corresponding joint size and material, use a instrument to measure and calculate the current flow.
 

Technical Parameters:

Model		FCT-8350
Measurement range	Flow rate	(0.5~5)m/s
	Instantaneous flow	（0~2000）m3/h
	Cumulative flow	（0~99999999）m3
Applicable pipe diameter		DN 25~DN 1000 for selection
Resolution		0.001 m3/h
Renew interval		1S
Accuracy		2.0 level
Repeatability		±0.5%
Probe input		Range ：0.5Hz~2KHz(0.5~5m/s)
		Power supply：DC 12V（instrument supply）
(4~20)mA output	Channels	Single
	Characteristics	Instrument/transmitter double mode（fully isolated）
	Loop resistance	500Ω(max)，DC 24V;
	Accuracy	±0.1mA
Control output	Channels	Single
	Contacts	Semi-conductor photo electronic relay
	Load capacity	Load current 50mA（max），AC/DC 30V（max）
	Control mode	Instantaneous flow high/low limit alarm, flow variable frequency conversion, probe frequency division, integrating value frequency division，OFF function
Working power		Working voltage：DC24V ±4 V   power consumption：<3.0W
Cable length		5m as standard ; or（1~500）m for selection
Working environment		Temp.:(0~50)℃； relative humidity: ≤85%RH
Storage environment		Temp.：（-20~60）℃; relative humidity：≤85%RH（non condensation）
Protection level		IP65（with back cover）
Dimension		96 mm×96 mm×94mm (H×W×D)
Hole size		91mm×91mm（H×W）
Installation		Panel mounted，fast installation
Probe	Material	Engineering plastic+ glass fiber
	Flow range	(0.5~5)m/s
	Pressure	≤0.6MPa
	Power supply	DC 12V
	Output pulse	Vp≥8V
	Installation	Insert pipe directly
	Diameter	DN 25~DN 350，or specified for larger pipe diameter
	Medium properties	Single medium（0~60）℃