Water Analysis Solutionswww.hbbossen.com

 

Characteristics:
A, The instrument is a combination controller of reverse osmosis and online conductivity/resistivity meter. It can perform the operation test of system, state control and online monitoring of conductivity/resistivity value(combination of PLC and conductivity/resistivity meter)
B, Green color of back light, big screen (pixel is 240*128), it can display 3 channels conductivity/resistivity(inlet TDS value, RO outlet TDS value, high-pure water outlet)
C, Multiple grade menu, animation operation mode.
D, 4-digit password, users can input or modify multiple group data, which meet all the requirements of automatic operation, multiple functions, and easy operation.
E, Perfect disinfect process can finish all the steps of disinfecting, after the disinfector was put in.
 
 
 
 
 
 
 

Inflow water flow chart. Diagram 1.
 
Technical Parameters:
■Power supply: DC24V (a power switch should be installed before designing the shell)
■Power consumption: ≤7.2W
■Environmental condition: 1) temperature: 0~60℃; 2)humidity: ≤ 85% RH.
■Accuracy: 1.5 level
■Output contact capacity load: 5A/250V AC   3A/24V DC
■Updating rate of collecting result: ≤1sec/per time
■Working pressure of conductance cell: 0~0.5Mpa
■Automatic temperature compensation: 1~49℃
■Interface mode: LCD display, English/sign display, touch key
■Measurement range
One channel for resistivity: 0-18.2 MΩ·cm (auxiliary electrode 0.05cm^-1); one for conductivity 0-200ppm measurement; one for conductivity 0-2000ppm.
■Return when over-time limit key. Under normal operation, not in the main interface, if there is no any key were pressed within 2 minutes, it will come back to the main menu automatically .
■  Outline dimension: 90 × 150 × 46mm (height × width × depth)
■  Slot dimension: 57 × 106mm (height × width)
■  Installation: Panel