Water Analysis Solutionswww.hbbossen.com

                

This meter is a perfect combination with the most advanced electronic, sensor technology and software design which is the best lab conductivity analysis meter with the highest performance and the lowest cost. It is suitable for the trade such as the petroleum, chemical industry, medicine, power plant and environmental protection, etc., especially has more extensive application in the fields of education and scientific research.
Built-in microprocessor chip, beautiful appearance and convenient operations, this meter has the following prominent features:
1.1. Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output and function setting etc.

1.2. Adopts digital filter and step slipping technology to improve meter’s response speed and result accuracy. “      ” will appear when reading to be stable.
1.3. Adopts advanced automatic frequency convertible and voltage regulation technology to enlarge the measuring range of conductivity electrode which constant K=1 to 10 times. It can meet measuring accuracy requirement for range within 100mS/cm by using only one-point calibration. It is the particular one–point calibration function for this meter.
1.4. Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series and China series.
1.5. Automatic choose conductivity measuring range, the meter has function of non-linearity automatic temperature compensation for high purified water less than 10μS/cm, which can greatly improve the measuring accuracy. It is especially suitable for electric power, microelectronics and medicine business.
1.6. Meter’s circuit board adopts SMT film-covering technology to improve meter’s reliability.
1.7. Meter has the only product serial number.
1.8. Dustproof and waterproof meter meets IP54 standards, all sockets are seal protected by the silica gel caps.
 
 
 
 
 
 
 
2. Technical Parameters:
2.1. Conductivity:

Measuring range	Conductivity: (0 to 2×106) μS/cm, can be divided into below 6 ranges: (0.00 to 20.00)μS/cm; (20.0 to 200.0)μS/cm; (200 to 2000)μS/cm; (2.00 to 20.00) mS/cm; (20.0 to 200.0) mS/cm; (200 to 2000) mS/cm (K=10). Resistivity：(0 to 100) MΩ·cm TDS:      (0 to 100) g/L Salinity:    (0 to 100) ppt
Resolution	0.01/0.1/1μS/cm  0.01/0.1/1 mS/cm
Accuracy	Meter: ±0.5% FS; connect meter with electrode: ±0.75% FS
Temp. compensation range	(0 to 50) ℃ (automatic)
Electrode constant	0.1 / 0.5 / 1 / 5 / 10 / 100 cm-1
Reference temperature	25℃, 20℃ and 18℃

2.2. Temperature:

Measuring range	-10℃to 110℃
Resolution	0.1℃
Accuracy	5~ 60℃ range：±0.4℃  other range：±0.8℃

2.3. Other Technical Parameters:

Data storage	600 groups
Storage content	Measuring value serial number, measuring value, temperature, ATC or MTC state, measuring date and time
Power	DC9V/300mA
Communication connector	RS-232
Size and weight	160 × 190 × 70mm/880g
Quality and safety certification	ISO9001:2000, CE and CMC

2.4. Working Condition:

Environment temperature	(5 to 35) ℃
Environmental humidity	≤80%
IP rating	IP54 Dustproof and waterproof