Water Analysis Solutionswww.hbbossen.com

This meter is a perfect combination with the most advanced electronic technology, sensor technology and software design. The meter can measure the parameters of conductivity, TDS, salinity, resistivity, and temperature for high accuracy water solution. It is the best portable conductivity meter with the highest performance and the lowest cost. It is suitable for the trade such as the mining industry, power plant, water treatment projects and environmental protection, etc., especially has more extensive application in the field and spot test.
Built-in microprocessor chip, beautiful appearance, multi-functional and easy to use, this meter has the following prominent features:
1.1. Built-in microprocessor chip, with the intelligent functions of automatic calibration, automatic temperature compensation, data storage, function setting and automatic power off and low voltage display etc. Equips with calibration solution and special carrying case, easy to use.

1.2. Adopts digital filter and step slipping technology to intelligently improve meter’s response speed and result accuracy. “    ” will appear when reading to be stable.
1.3. Adopts advanced automatic frequency convertible and voltage regulation technology to enlarge the measuring range of conductivity electrode which constant K=1 to 10 times. It can meet measuring accuracy requirement for range within 0 to 200mS/cm by using only one-point calibration. It is the particular one–point calibration function for this meter.
1.4. Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of standard solutions: Europe & USA series and CHINA series.
1.5. Automatically select conductivity measuring range, the meter will do non-linearity temperature compensation test for purified water and high purified water less than 10μS/cm, which greatly improve the measuring accuracy. It is especially suitable for use in fields of electric power, microelectronics and medicine.
1.6. Meter’s circuit board adopts SMT film-covering technology to improve meter’s production reliability.
1.7. Meter has the back light LCD display monitor.
1.8. Dustproof and waterproof meter meets IP57 rating.
 
2. Technical Parameters:
 

2.1. Conductivity：

Measuring range	Conductivity: (0.00 to 19.99)μS/cm  (20.0 to 199.9)μS/cm (200 to 1999)μS/cm   (2.00 to 19.99) mS/cm (20.0 to 199.9) mS/cm TDS:     (0 to 100) g/L Salinity :  (0 to 100) ppt Resistivity:(0 to 100) MΩ·cm
Resolution	0.01/0.1/1μS/cm  0.01/0.1 mS/cm
Accuracy	Meter:±1.0% FS, connect meter with electrode:±1.5% FS
Temp. compensation range	(0 to 50) ℃ (automatic)
Electrode constant	0.1 / 1 / 10 cm-1
Benchmark temperature	25℃, 20℃and 18℃

2.2. Other Technical Parameters:

Data storage	100 groups
Storage content	Series number, measuring value, measuring unit and temperature,
Power	Two AA batteries (1.5V x2)
Size and weight	Meter: (65×120×31)mm/180g;  Carrying case:(255 x 210x 50)mm/790g
Quality and safety certification	ISO9001:2000, CE and CMC

2.3. Working Condition:

Environment temperature	5 to 35 ℃ (0.01 grade)
Environmental humidity	≤85%
IP rating	IP57 Dustproof and waterproof