ECM-411 (Cost-effective) - Conductivity Meter - Water Analysis Solutions

Product

Location : HOME >> Product >> Industrial >> Conductivity Meter

ECM-411 (Cost-effective)

AddTime：2016-12-02 10:50:16 Views: 0

Inddustrial Conductivity Meter ECM-411 is industrial on-line instruments for measuring and controlling conductivity. Withisolated 4-20mA signal output and relay output function, it applies widely to the measurement and control of pure water in the fields of pharmacy, chemical industry, electronic industry, food industry and beverage industry.

Technical performance

　　Measuring range: 0～20、0～200、0～2000μS/cm □

　　Switch display 0～10、0～100、0～1000ppm □

　　0～2000ppm □

　　0～20mS/cm □

　　Displaying mode:3½-digit apheliotropic liquid crystal display

　　Accuracy: 1.5%(FS)

　　Stability:±2×10-3(FS)/24h

　　Working pressure: 0～0.5MPa

　　Medium’s temperature:0～50℃

　　Temperature compensation: taking 25℃ as the datum point, digital

　　compensation.

　　Output current: Active photoelectric isolated output 4～20mA

　　Control output: max. and min. (constantly open)double relay output

　　Capacity of contact points: 7A/AC250V (with resistant loads)

　　Provided electrodes:1.0cm-1 electrodes

　　Length of the cable: conventional 5m or otherwise agreed m

　　Environmental conditions: temperature: 0～50℃; humidity: ≤85%RH

　　Power supply: AC 220V±10% 50/60Hz □

　　External dimensions: 48×96×100mm (height×width×depth)

　　The hole on the dial plate: 45×91mm

　　Installation: Panel mount

close ->