EC-988 989 982 983

Product

Location : HOME >> Product >> Handheld >> Pentype Conductivity Meter

AddTime：2016-12-07 23:06:29 Views: 0

EC-988/989/982/983 conductivity meter / TDS meter

Descriptions:
The conductivity tester to measure water concentrations. It is used in water treatment,
chemical dilution, industrial waste or drinking water where water quality control is required.
It is widely used in industrial boiler, cooling towers, chemical mixing where water concentration is monitored.
The best tool technician on the go!
TDS tester is design for ruggedness and accuracy. TDS is measured in water processing and industrial water
treatment and control. The conversion factor from conductivity is the factor of 2 which is an industrial standard.
It is the best gauge to perform QC and on-site checks in boilers, cooling towers, chemical dilution for waste disposal.
  One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solution.

  Hold Function
Able to freeze display for ease of reading and recording.

  Low battery alert Function
The meter is supplied with BEPS (Battery Error Preventing System) which avoids any erroneous reading due to low battery level, by switching the meter off.

  LCD with backlit Function
Easy reading in a dark environmental

Technology Parameters >>
Model	EC-988	EC-989	TDS-982	TDS-983
Measuring range	0~1999μS/cm	0~19.99ms/cm	0~1999ppm	0~19.99ppt
Accuracy	±2℅F·S	±2℅F·S	±2℅F·S	±2℅F·S
Resolution	1μS/cm	0.01ms/cm	1ppm	0.01ppt
Display	4-digital LCD with Backlit
Automatic Temperature Compensation	0℃~50℃
Environment	Temperature:0℃~50℃; Humidity:≤95℅
Power Supply	4×1.5V(AG13)
Dimensions	170mm×33mm×20mm
Weight	69g

Water Analysis Solutionswww.hbbossen.com

Product

EC-988 989 982 983

Ask for Price?

Contact us