pH Sensor-Composite PH Electrode PH8011

Product

Location : HOME >> Product >> Industrial >> Sensor

AddTime：2016-12-02 17:14:36 Views: 0

Features

1.It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, difficult to block and

easy to maintain.

2.Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh

environment.

3.There is no need for additional dielectric and there is a little amount of maintenance.

4. High accuracy, fast response and good repeatability

Model No.: PH8011
Measuring range: 0~14PH	Temperature range: 0-85℃
Compressive strength: 0.6MPa	Material: PPS/PC
Installation Size: Upper and Lower 3/4NPT Pipe Thread
Connection: Low-noise cable goes out directly.
The antimony is relatively sturdy and corrosion-resistant, which meets the requirements for solid electrodes,
corrosion resistance and the measurement of the water body containing hydrofluoric acid, such as the
wastewater treatment in semiconductors and iron and steel industries. The antimony-sensitive film is used for
the industries corrosive to the glass. But there are also limitations. If the measured ingredients are replaced by
antimony or react with antimony to produce complex ions, they should not be used.
Note: Keep the antimony electrode surface cleaning; if necessary, use the fine
Sandpaper to polish the surface of antimony.