Product
- Industrial
- Conductivity Meter
- Resistivity Meter
- pH Meter
- Reverse Osmosis Controller
- Flow Meter
- Dissolved Oxygen Meter
- Free chlorine analyzer
- Turbidity Meter
- TSS Meter
- COD
- Fluorion Analyzer
- Sodium Meter
- Silicate Meter
- Hydrazine Analyzer
- Multiparameter analyzer
- Management system
- Transmitter
- Sensor
- Control Panel
- Installation Accessories
- Plastic Electric Box
- water treatment materials
- One-stop Purchase Materials
- Handheld
- Portable Conductivity Meter
- Portable pH meter
- Portable pH and conductivity a
- Portable pH and conductivity m
- Portable pH and dissolved oxyg
- Portable pH ORP conductivity D
- Portable ORP meter
- Portable Dissolved Oxygen mete
- Portable conductivity and DO m
- Portable Free Chlorine meter
- Portable Acid Meter SX7120
- Portable Acid-Alkali Meter SX7
- Portable Hardness Meter YD300
- Portable turbidity meter
- Portable Thermometer
- Portable Tachometer -laser typ
- Portable aquaculture multipara
- Portable COD
- Pentype Conductivity Meter
- Pentype TDS Meter
- Pentype pH meter
- Pentype ORP meter
- Pen type conductivity TDS sali
- Pentype Free Chlorine Meter
- Dual channels TDS Meter for Dr
- Handheld Refractometer
- Laboratory
- Laboratory Conductivity meter
- Laboratory Conductivity Meter
- Laboratory Conductivity and DO
- Laboratory pH meter
- Laboratory pH meter -precise M
- Laboratory pH and Conductivity
- Laboratory pH and Conductivity
- Laboratory pH and DO meter MP5
- Laboratory Dissolved Oxygen me
- Laboratory Turbidity Meter
- Laboratory Fluoride Ion Meter
- Laboratory Sodium Meter
- Laboratory BOD analyzer (diffe
- Laboratory COD Ammonia Nitroge
- Laboratory Calcium Ion Meter M
- Laboratory chroma meter CLR-3
- Laboratory Electrode
- Stirrer
- Accessories
- Aquarium
Dissolved Oxygen Sensor-High temperature Dissolved oxygen sensor DOG-208FA
AddTime：2016-12-02 14:44:18 Views: 0
DOG-208FA electrode, which is specially designed to be resistant to 130 degrees steam sterilization, the pressure auto-balance high temperature dissolved oxygen electrode, for liquids or gases dissolved oxygen measurement, the electrode is most suitable for small microbial culture reactor dissolved oxygen levels on line. Can also be used for environmental monitoring, wastewater treatment and aquaculture on-line measurement dissolved oxygen levels.
Dissolved oxygen electrode characteristics
Technical indexes
Dissolved oxygen electrode characteristics
| 1DOG-208FA high temperature fermentation dissolved oxygen |
| electrode applicable for Polarographic Principle |
| 2.With imported breathable membrane heads |
| 3.Steel gauze electrode membrane and silicone rubber |
| 4.Endure high temperature, No deformation characteristics |
Technical indexes
| 1.Electrode body material: stainless steel |
| 2.Permeable membrane: fluorine plastic, |
| silicone, stainless steel wire mesh composite membrane. |
| 3.Cathode: platinum wire |
| 4.Anode: silver |
| 5.Electrodes built-in temperature sensor: PT1000 |
| 6.The response current in the air: About 60nA |
| 7.The response current in a nitrogen atmosphere: less than |
| one percent response current of response in air. |
| 8.Electrode response time: about 60 seconds (up 95% response) |
| 9.Electrode Response Stability: a constant oxygen partial pressure |
| at a constant temperature environment, response current drift less |
| than 3% per week |
| Liquid mixing flow to the electrode response: 3% or less (in water at |
| room temperature) |
| Electrode Response Temperature Coefficient: 3% (greenhouse) |
| Insert the electrode diameter: 12 mm, 19 mm, 25 mm optional |
| Electrode insertion length: 80,150,200,250,300 mm |
