Product
- Industrial
- Conductivity Meter
- Resistivity Meter
- pH Meter
- Reverse Osmosis Controller
- Flow Meter
- Dissolved Oxygen Meter
- Free chlorine analyzer
- Turbidity Meter
- TSS Meter
- COD
- Fluorion Analyzer
- Sodium Meter
- Silicate Meter
- Hydrazine Analyzer
- Multiparameter analyzer
- Management system
- Transmitter
- Sensor
- Control Panel
- Installation Accessories
- Plastic Electric Box
- water treatment materials
- One-stop Purchase Materials
- Handheld
- Portable Conductivity Meter
- Portable pH meter
- Portable pH and conductivity a
- Portable pH and conductivity m
- Portable pH and dissolved oxyg
- Portable pH ORP conductivity D
- Portable ORP meter
- Portable Dissolved Oxygen mete
- Portable conductivity and DO m
- Portable Free Chlorine meter
- Portable Acid Meter SX7120
- Portable Acid-Alkali Meter SX7
- Portable Hardness Meter YD300
- Portable turbidity meter
- Portable Thermometer
- Portable Tachometer -laser typ
- Portable aquaculture multipara
- Portable COD
- Pentype Conductivity Meter
- Pentype TDS Meter
- Pentype pH meter
- Pentype ORP meter
- Pen type conductivity TDS sali
- Pentype Free Chlorine Meter
- Dual channels TDS Meter for Dr
- Handheld Refractometer
- Laboratory
- Laboratory Conductivity meter
- Laboratory Conductivity Meter
- Laboratory Conductivity and DO
- Laboratory pH meter
- Laboratory pH meter -precise M
- Laboratory pH and Conductivity
- Laboratory pH and Conductivity
- Laboratory pH and DO meter MP5
- Laboratory Dissolved Oxygen me
- Laboratory Turbidity Meter
- Laboratory Fluoride Ion Meter
- Laboratory Sodium Meter
- Laboratory BOD analyzer (diffe
- Laboratory COD Ammonia Nitroge
- Laboratory Calcium Ion Meter M
- Laboratory chroma meter CLR-3
- Laboratory Electrode
- Stirrer
- Accessories
- Aquarium
Silica meter GSGG-5089
AddTime:2016-12-03 11:29:24 Views: 0

Features
1. Low detection limit, very suitable for power plant water feed, saturated steam and superheated steam silicon content detection and control;
2. Long life light source, using cold monochrome light source;
3. Historical curve recording function, can store 30 days of data;
4. Automatic calibration function, period arbitrarily set;
5. Support multi-channel measurements in water samples, optional 1-6 channels;
6. Achieve a maintenance-free, except adding reagents, guide standards.
Technical Indexes
1. Measuring range: 0 ~ 20ug / l, 0 ~ 2000ug / l ,0-20mg / L option
2. Accuracy: ± 1% F.S
3. Repeatability: ± 1% F.S
4. Stability: Drift ≤ ± 1% F.S / 24hours
5. Response time: the initial response is 12 minutes
6. Sampling period: about 10 minutes / Channel
7. Watery conditions: Flow:> 100 ml / min
Temperature: 10 ~ 45 ℃
Pressure: 10 kPa ~ 100 kPa
8.Environmental conditions: Temperature: 5 ~ 45 ℃, Humidity: <85% RH
9. Reagent consumption: Three kinds reagents, about 3 liters / month for each kind.
10.Current output: 4 ~ 20mA arbitrarily set within this range, multi-channel meter, channel independent output
11. Alarm output: normally open relay contacts 220V/1A
12. Power supply: AC220V ± 10% 50HZ
13. Power consumption: ≈ 50W
14. Dimensions: 720mm (height) × 460mm (width) × 300mm (depth)
15. Hole size: 665mm × 405mm