Water Analysis Solutionswww.hbbossen.com

                     

This meter is a perfect combination with the most advanced electronic, sensor technology and software design which is the best lab fluoride ion concentration analysis meter with the highest performance and the lowest cost. It can be commonly used for testing the fluoride ion concentration of drinking water, ground water, sea water, life pollution water and industrial waster water as well as testing for fluoride of mineral material, organic material and biological material.
Built-in microprocessor chip, beautiful appearance and easy to use, this meter has the following prominent features:
1.1. Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output and function setting etc.

1.2.  Adopts digital filter and step slipping technology to improve meter’s response speed and result accuracy. “       ” will appear when reading to be stable.
1.3.  2 points fluoride ion concentration standard solution calibration, can directly measure sample’s fluoride ion concentration; Also can use the standard addition method measuring mode in the computer through MP519 communication software.
1.4. Meter’s circuit board adopts SMT film-covering technology to improve meter’s reliability.
1.5. Meter has the only product serial number.
1.6. Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
2. Technical Parameters:
 

2.1. Fluoride Ion:

Measuring range	Meter：(0.00 to 9.00) pF，connect meter with electrode：(1.00 to 6.00) pF
Display unit	pF, mol/L, mg/L, ppm
Accuracy	±0.01 pF
Input current	≤2×10-12 A
Input impedance	≥1×1012 Ω
Stability	±0.01 pF/3h
Temp. compensation range	(0 to 50) ℃ ( automatic or manual )

2.2. mV:

Measuring range	-1999.9 mV to 0 to 1999.9mV
Resolution	0.1mV
Accuracy	±0.1% FS

2.3. Temperature:

Measuring range	-10℃ to 110℃
Resolution	0.1℃
Accuracy	(5 to 60)℃ range：±0.5℃ other range：±1.0℃

2.4. Other Technical Parameters:

Data storage	600 groups
Storage content	Measuring value serial number, measuring value, temperature, ATC or MTC state, measuring date and time
Power	DC9V/300mA
Communication connector	RS-232
Size and weight	160 × 190 × 70mm/880g
Quality and safety certification	ISO9001:2000, CE and CMC

2.5. Working Condition:

Environment temperature	(5 to 35) ℃
Environmental humidity	≤85%
IP grade	IP54  Dustproof and waterproof